Axial fans ABF et al.

Bahcivan axial industrial fans are designed to move air and other homogeneous gases without the presence of viscous components in them.
Series BDRAX, BORAX, 4M/4T, VHRA, BSM/BST, BSMS, BB, BSV, BSV-D, BK.

Fans of the VO (ABF) - low pressure series are designed to move large volumes of air outside the duct network. In ventilation of industrial workshops, production sites, compressor rooms; for cooling industrial equipment; in drying cabinets and chambers.

Fans of the WOK series (ABF) are used for ventilation of industrial premises, cooling of equipment with some restrictions for duct ventilation.

Axial flanged fans of the VO-F (ABF) series are designed for use in systems of general exchange and technological ventilation of restaurants, shops, workshops, warehouses and other premises, cooling of appliances and equipment.

Axial fans of the ROF-K (ABF) series are used for air conditioning of residential premises, shops, offices, restaurants, bars, warehouses, production workshops, workshops and other premises, as well as for blowing and removing warm air.

Axial fans of the ROF-F (ABF) series with a square mounting panel have good cooling parameters and a low noise level. Fans are used in industrial ventilation systems, refrigerators, ventilation of shops, restaurants, gyms, and are also designed for blowing technological facilities and removing heat from them.

Fans of the ROF-C (ABF) series are available with single-phase and three-phase connection to the electrical network. The electric motors of the fans are equipped with built-in thermal relays with the possibility of connecting to protection devices.

Fans of the ROF-A (ABF) series are manufactured with a square mounting flange with a protective grille. As a check valve, the fans include gravity blinds that prevent air from entering the room when the fans are turned off.

Axial fans reversible low-pressure OVR (ABF) are used for supply and exhaust ventilation. A feature of the fans is the ability to move air both in the forward and reverse direction with a slight decrease in air supply.

Axial fans of the OVR (ABF) are used for their intended purpose for installation in drying systems of the OVR-S series. The movement of air is carried out in two directions with absolutely the same performance.

Reversible axial fans of the ADW (ABF) series are specially designed for installation in wood drying chambers. Depending on the installation method inside the drying chamber, the fans are supplied with a round or square housing.
They are equipped with an electric motor with the possibility of operation at temperatures above +100 ° C and an increased moisture content in the air.

Axial EBM-PAPST fans are distinguished by a small installation depth, low noise level, as well as high efficiency, which allows using them to supply air through heat exchangers.
Models: A3G300, A3G350, A3G400, A3G450, A3G500, A3G630, A3G800, A3GZ.

Axial fans of the VO series (LISSANT). Compact, low-noise axial fans are used for installation in ventilation systems of industrial and public premises, as well as refrigeration and air conditioning.

Axial fans of general technical purpose IN (TEPLOMASH) are designed for installation in industrial buildings, public and residential buildings, in agricultural production, technological installations.

Axial fans small-sized IN (TEPLOMASH) are designed for air exchange in small rooms: offices, offices, sanitary rooms, small refrigeration units and other industrial and agricultural facilities.

Axial fans with an external motor VO (TEPLOMASH) are used in ventilation systems of industrial, public and residential buildings, refrigeration equipment and other technological installations. Fans come with a grid protection (type A), with a grid protection and a wall panel (type B), in a shell with flanges (type C).

FE (NED) axial fans are designed to move air and other non-explosive gas mixtures in ventilation systems where high performance is required with relatively low resistance of these systems.

Axial backup fans VPO (NED) are designed both for air backup in fire protection systems and for fresh air supply in case of fire, and for operation in general exchange ventilation systems with and without a short duct network. They are available in 5 standard sizes with a capacity from 3000 m3/h to 130,000 m3/h and a static pressure of up to 1350 Pa.

Roof axial fans of the VPOK backup (NED) are designed both for air backup in fire protection systems and for fresh air supply in case of fire, and for operation in general exchange ventilation systems with and without a short duct network. 5 standard sizes with a capacity from 3000 m3/h to 130,000 m3/h and a static pressure of up to 1350 Pa.

Axial fans AW sileo EC, AW sileo, AR sileo, AXC, AXCBF (Systemair) are designed for use in highly efficient supply and exhaust ventilation systems. Axial fans of low, medium and high pressure are available.

Axial (axial) main fans (AERVAN). Models: VIOS-Sh, VIOS-300 (VO-12-303), VIOS-190 (VO-23-195), VIOS-180 (VO-25-188), VIOS-160 (VO-30-160), UVOP.

Axial (axial) roof fans (AERVAN). Models: UVOK-300 (UVOK-12-303), UVOK-180 (UVOK-25-188), UVOK-160 (UVOK-30-160), KRUP-Kr-190, KRUP-Kr, KRUP.

Questionnaire